.config/dunst/dunstrc

@@ -24,16 +24,16 @@
     # dynamic width from 0 to 300
     # width = (0, 300)
     # constant width of 300
-    width = (0, 300)
+    width = 300
 
     # The maximum height of a single notification, excluding the frame.
-    height = (0, 300)
+    height = 300
 
     # Position the notification in the top right corner
     origin = top-right
 
     # Offset from the origin
-    offset = (50, 10)
+    offset = 10x50
 
     # Scale factor. It is auto-detected if value is 0.
     scale = 0
@@ -81,7 +81,7 @@
     # The transparency of the window.  Range: [0; 100].
     # This option will only work if a compositing window manager is
     # present (e.g. xcompmgr, compiz, etc.). (X11 only)
-    transparency = 99
+    transparency = 0
 
     # Draw a line of "separator_height" pixel height between two
     # notifications.
@@ -103,7 +103,7 @@
     frame_width = 2
 
     # Defines color of the frame around the notification window.
-    frame_color = "#ff4d00"
+    frame_color = "#ffffff11"
 
     # Size of gap to display between notifications - requires a compositor.
     # If value is greater than 0, separator_height will be ignored and a border
@@ -263,7 +263,7 @@
     # corners.
     # The radius will be automatically lowered if it exceeds half of the
     # notification height to avoid clipping text and/or icons.
-    corner_radius = 2
+    corner_radius = 8
 
     # Define which corners to round when drawing the window. If the corner radius
     # is set to 0 this option will be ignored.

.config/nvim/lua/goodhumored/core/dap/dap.lua

@@ -1,60 +1,3 @@
--- Function to evaluate the variable or expression under the cursor or selected in visual mode
-local function dap_evaluate_expression()
-	local dap = require("dap")
-	if not dap.session() then
-		print("No active debug session")
-		return
-	end
-
-	-- Determine if we're in visual mode and get the expression
-	local expression
-	local mode = vim.fn.mode()
-	if mode == "v" or mode == "V" or mode == "<C-v>" then
-		-- Visual mode: grab the selected text
-		local start_pos = vim.fn.getpos("v")
-		local end_pos = vim.fn.getpos(".")
-		local start_line, start_col = start_pos[2], start_pos[3]
-		local end_line, end_col = end_pos[2], end_pos[3]
-
-		-- Handle multi-line selections or single-line selections
-		if start_line == end_line then
-			local line = vim.fn.getline(start_line)
-			expression = string.sub(line, start_col, end_col)
-		else
-			local lines = vim.fn.getline(start_line, end_line)
-			lines[1] = string.sub(lines[1], start_col)
-			lines[#lines] = string.sub(lines[#lines], 1, end_col)
-			expression = table.concat(lines, "\n")
-		end
-
-		-- Exit visual mode after grabbing the selection
-		vim.api.nvim_command("normal! <Esc>")
-	else
-		-- Normal mode: grab the word under the cursor
-		expression = vim.fn.expand("<cword>")
-	end
-
-	-- Ask the debugger to evaluate the expression
-	dap.session():request("evaluate", {
-		expression = expression,
-		context = "repl",
-	}, function(err, response)
-		if err then
-			print("Error evaluating expression: " .. err.message)
-			return
-		end
-		if response and response.result then
-			-- Show the result in the command line
-			vim.api.nvim_echo({ { expression .. " = " .. response.result, "Normal" } }, true, {})
-		else
-			print("No result for expression: " .. expression)
-		end
-	end)
-end
-
--- Bind it to a key, e.g., <leader>de
-vim.keymap.set("n", "<leader>de", dap_evaluate_expression, { desc = "Evaluate expression under cursor" })
-
 return {
 	"mfussenegger/nvim-dap",
 	recommended = true,
@@ -99,20 +42,6 @@ return {
 		end
 		for _, lang in ipairs({ "typescript", "javascript", "typescriptreact", "javascriptreact" }) do
 			dap.configurations[lang] = {
-				{
-					type = "pwa-node",
-					request = "launch",
-					name = "Launch NestJS App",
-					program = "${workspaceFolder}/src/main.ts",
-					runtimeExecutable = "node",
-					runtimeArgs = { "-r", "ts-node/register" },
-					envFile = "${workspaceFolder}/.env",
-					trace = true,
-					cwd = "${workspaceFolder}",
-					sourceMaps = true,
-					protocol = "inspector",
-					console = "integratedTerminal",
-				},
 				{
 					type = "pwa-node",
 					request = "launch",
@@ -159,23 +88,6 @@ return {
 			},
 		}
 
-		dap.adapters.cortex = {
-			type = "executable",
-			command = "arm-none-eabi-gdb",
-			args = { "-x", "${workspaceFolder}/debug.gdb" },
-		}
-
-		dap.configurations.c = {
-			{
-				name = "Debug STM32",
-				type = "cortex",
-				request = "launch",
-				program = "${workspaceFolder}/build/main.elf",
-				cwd = "${workspaceFolder}",
-				stopOnEntry = true,
-			},
-		}
-
 		-- setup dap config by VsCode launch.json file
 		local vscode = require("dap.ext.vscode")
 		local json = require("plenary.json")
@@ -198,12 +110,6 @@ return {
 			end,
 			desc = "Breakpoint Condition",
 		},
-		{
-			"<leader>de",
-			dap_evaluate_expression,
-			desc = "Evaluate expression under cursor or selection",
-			mode = { "n", "v" },
-		},
 		{
 			"<leader>db",
 			function()

.config/nvim/lua/goodhumored/core/dap/floating-values.lua.lua

@@ -1,39 +0,0 @@
-return {
-	"theHamsta/nvim-dap-virtual-text",
-	config = function()
-		require("nvim-dap-virtual-text").setup({
-			enabled = true, -- enable this plugin (the default)
-			enabled_commands = true, -- create commands DapVirtualTextEnable, DapVirtualTextDisable, DapVirtualTextToggle, (DapVirtualTextForceRefresh for refreshing when debug adapter did not notify its termination)
-			highlight_changed_variables = true, -- highlight changed values with NvimDapVirtualTextChanged, else always NvimDapVirtualText
-			highlight_new_as_changed = false, -- highlight new variables in the same way as changed variables (if highlight_changed_variables)
-			show_stop_reason = true, -- show stop reason when stopped for exceptions
-			commented = false, -- prefix virtual text with comment string
-			only_first_definition = true, -- only show virtual text at first definition (if there are multiple)
-			all_references = false, -- show virtual text on all all references of the variable (not only definitions)
-			clear_on_continue = false, -- clear virtual text on "continue" (might cause flickering when stepping)
-			--- A callback that determines how a variable is displayed or whether it should be omitted
-			--- @param variable Variable https://microsoft.github.io/debug-adapter-protocol/specification#Types_Variable
-			--- @param buf number
-			--- @param stackframe dap.StackFrame https://microsoft.github.io/debug-adapter-protocol/specification#Types_StackFrame
-			--- @param node userdata tree-sitter node identified as variable definition of reference (see `:h tsnode`)
-			--- @param options nvim_dap_virtual_text_options Current options for nvim-dap-virtual-text
-			--- @return string|nil A text how the virtual text should be displayed or nil, if this variable shouldn't be displayed
-			display_callback = function(variable, buf, stackframe, node, options)
-				-- by default, strip out new line characters
-				if options.virt_text_pos == "inline" then
-					return " = " .. variable.value:gsub("%s+", " ")
-				else
-					return variable.name .. " = " .. variable.value:gsub("%s+", " ")
-				end
-			end,
-			-- position of virtual text, see `:h nvim_buf_set_extmark()`, default tries to inline the virtual text. Use 'eol' to set to end of line
-			virt_text_pos = vim.fn.has("nvim-0.10") == 1 and "inline" or "eol",
-
-			-- experimental features:
-			all_frames = false, -- show virtual text for all stack frames not only current. Only works for debugpy on my machine.
-			virt_lines = false, -- show virtual lines instead of virtual text (will flicker!)
-			virt_text_win_col = nil, -- position the virtual text at a fixed window column (starting from the first text column) ,
-			-- e.g. 80 to position at column 80, see `:h nvim_buf_set_extmark()`
-		})
-	end,
-}